Lakaisukone / tiepalvelu

Bucher - GMeiner - Giletta CityFant 6000

Operating hours:2791, First registration:18.02.2021_____Standard basic equipment CF6000:Engine fan unitBuilt-in engine for superstructure driveFuel tank for built-in engine in sweeper superstructure, capacity approx. 150 lHydraulic fan drive Hydraulic oil tank 50 l Engine compartment lined with noise-insulating materialFan Exhaust air routed upwards through the front of the containerInfinitely variable engine speed adjustment Hydraulic pump, single Sweepings container Sweepings container (with rear flap and sieve) and water tank made of 1.4003 chrome steel Engine compartment cladding mild steelSweepings container gross volume 6.5 m³Sweepings container floor made of chrome-alloyed stainless steel, 1.4301Sweepings container tipping angle approx. 55 degreesDirt chute made of chrome steel, 1.4003Observation flap right and leftDirt water drain 4", A-coupling Air guide sieve, pneumatically foldable2 orange rotating beacons, front and rear on KGBAir shut-off on suction hose, pneumatically actuatedMulti-stage safety support, pneumatically actuated Marking lights at the rear of the container, side marking lights Integrated water tank, approx. 1.900 liter capacity Preparation for rear suction hose extension arm Sweepings pick-up right and leftSweepings pick-up, right and leftSweepings pick-up, right and left, wear-resistant coatingCoarse pick-up by tilting the suction mouthSuction hose diameter 250 mmDisc brushes pushedHydraulically driven disc brushes, steelDisc brushes, steel trim, diameter 700 mmInfinitely variable speed regulation for disc brushes Two robust swivel castor wheelsAutomatic lifting of the sweeping units when reversingWorking lights for sweeping unit Roller brushes:Roller brush suspension, pushed, swivelingBrush length 1.500 mm, broom diameter 300-400 mm with plastic trimming Hydraulically driven roller broomThrow limiting apron for roller broom unit Water system:Water tank volume approx. 1,900 lWater tank made of chrome steel, 1.4003 with coatingWater level indicator in the cab Water filling device, Storz C (2"), rightManual water filling device, right and leftWater pump, hydraulically drivenAutomatic water stop when lifting the sweeping unitSpray water connection, 3/4", rear right Water blow-out systemElectric water valves in the cab2-nozzle strip low pressure Front instrument panel and control panel:Bucher instrument panel, incl. 7" color displayErgonomic control unit, mounted on the driver's door, equipped with the main functions Display includes the following functions: Water level indicator, fuel indicator, built-in engine speed, operating hours cooling temperature warning and indicator lamps for battery lamps, rear axle load, built-in engine oil level indicator, air filter contamination, coolant temperature, engine oil pressure indicatorControl and control unit for regulating the brush support pressure (brush relief), infinitely variable speed regulation of the disc brushes, infinitely variable speed regulation of the built-in engine.Electric valves for water system, actuation in the driver's cabOperation of the dirt container functions by means of a cable remote control from the driver's cab, but also possible from the outsideOperation of the air guide sieve
B92829Yubb

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.