Vaihtolava-puoliperävaunu

KÖGEL PORT 20 TANKPLEX Containerchassis

More vehicles available at

Excerpt from the equipment list. Complete equipment details available on request.

Chassis
* Chassis frame made of high-quality steel, without outer frame
* Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337
* With cross member and container locks for accommodating:
a) 1 x 20' container centrally positioned
b) C715, C745, C782
c) 20', 23', 25' tank containers

Running Gear
* Axle lift mechanism on axle 1
* Fully automatic, load-dependent axle lift control
* Start assist: activated via 3x brake operation, 30% overload up to a speed of 25 km/h, operation via chassis switch. Additionally operable from the cab (switch required in cab - PIN 12)
* Three-axle SAF INTRADISC assembly, with disc brakes Ø approx. 430 mm, ET 120
* Air suspension with approx. 180 mm stroke

Vehicle Tyres
* Wheels with internal sensors in accordance with UN ECE R141
* 6x 385/65 R 22.5 UNIROYAL TH 50 tyres
* 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis Attachments
* Mechanical landing legs with compensating foot, 24 t lifting capacity, single-side operation on the right in driving direction
* Spray suppression system in accordance with Regulation (EU) No. 109/2011 for three-axle assembly with 22.5-inch tyres, consisting of: 3 pairs of semi-circular mudguards with spray flaps
* 2 wheel chocks with holders
* 2 waterproof plastic toolboxes, interior dimensions approx. 600 x 400 x 470 mm, installed left and right between landing legs and axle group, complies with ECE-R73 as side underrun protection
* Rear underrun protection made of steel, to ECE-R58, with mounting brackets for sloped rear end
Dkolhcdjwfvwijwzep
* Height of underrun protection profile min. 120 mm, designed for increased test forces

Brake / Air Suspension System
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines)
* Parking brake as spring-loaded brake
* External pneumatic connections as well as external EBS diagnostic connector via ISO 7638 socket
* Air suspension system including 1 lift & lower valve, mounted left in direction of travel ahead of the axle group
* 2 non-interchangeable coupling heads at the front, ISO 1728
* Air tanks for brake and air supply made of steel (EN 286-2)

Tank Equipment
* Walkable work platform, removable for cleaning, consisting of one-piece galvanized grating, mounted at the height of underrun protection profile between the main beams
* Stairs with 3 galvanized grated steps, mounted on both sides
* With galvanized grated catwalk, mounted at the rear, flush with the top edge of main beams
* Stainless steel drip tray (bottom) with 2-inch drain socket and shut-off valve, mounted beneath the work platform, including central stainless steel drip sheet on the rear container cross member
* 4 plastic hose tubes, diameter approx. 200 mm, length approx. 5,000 mm, with lockable rear lids, protected installation between the main beams
* 1 grounding lug rear right

Bumper Protection
* 1 pair of rubber bumpers approx. 200 x 105 x 65 mm mounted on underrun protection bracket

Electrics / Electronics
* Lamp carrier made of steel, installed above the underrun protection, lower mounting position
* KÖGEL LUXIMA Premium package, consisting of: - LED license plate lighting, LED marker lights and reflectors at the front - flashing LED side marker lights - Superseal and bayonet connectors for lights
* 2 multi-chamber tail lights with integrated LED outline lighting

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.