Kippiauto

CARNEHL HKS/HG 25m3 5,1t HARDOX ALCOA Bremse+Reifen 90%

WhatsApp
CARNEHL 25m3 HARDOX 2-axle tipper semi-trailer EZ 23.02.2021
GERMAN TRAILER 1st hand
Equipment:
Weight: GG . 32000 kg
Tare weight approx. 5,130 kg
Fifth wheel load approx. 14000 kg
Axle loads 2 x 9,000 kg
Dimensions:
Length in length approx. 7,600 mm
Width in length approx. 2,340 mm
Dropside height approx. 1,460 mm
Load volume approx. 25 m3
Color silver-grey
Chassis SHK-2-ST-74 In proven welded construction using high-quality fine-grain steels, for 7350/7400 mm body length, blasted and primed, chassis in reinforced design for half-shell body, saddle plate 8 mm continuous, kingpin 2", chassis upper belts adapted to the body shape and welded in at an angle
Trough rubber support on both sides on upper belts
Towing coupling
Aluminum single ladder (8 rungs) 2450 mm long, mounted on the chassis with brackets
Folding underride guard, fitted in accordance with EC directives
Support preparation (brackets only)
3x axlesSAF- 9 t integral axle unit (OFF-ROAD 430mm disk ET 120)
Wheelbase 1,310 mm Track width 2,040 mm, with air suspension, 1xABS
ALCOA Dura Bright (polished+coated) 11.75R22.5 ET120
Tires 385/65 R22,5 ca.90-95% see photos
Brake system WABCO-EBS-E 2S/2M+RSP with integrated air suspension system
SAF TyrePilot automatic tire inflation system
Parking brake via spring brake
Automatic lowering when tipping with switch-off
Aluminum air reservoir
Lifting and lowering device for air suspension, with Smart Board control panel
Loading pressure gauge on bulkhead
Electrical system according to ECE-R 48, 24 V system
1x15-pole
6 round LED 3-chamber lights
LED clearance lights front white, rear red/white
Yellow LED side marker lights with integrated reflectors
LED license plate lighting for single-line license plate
Rear fog light
3x reversing lights for trailers, Workpoint LED 1500
Aluminum checker plate lamp guard
Flashing function for side marker lights
HYVA ALPHA front lifting jack, ND/HD working pressure up to 250 bar
Working volume 86 L, required min. tank filling volume 116 L
Complete with pipes and connections NW-25
1" coupling plug
Tilt angle 50°- 52°
Lubrication points pulled outwards at the front
SHG-4.3-146-740 body
Rear tipping body Xtra Light 4.3
24 m³, 7,400 mm x 1,460 mm made from folded half shells
Welded with continuous longitudinal seam
Floor area made of 4 mm, side walls made of 3 mm HARDOX 450 HB
Additional 4 mm reinforcement in the pouring area under the trough base, tapering to the front via release lever
top chord edged on both sides in 3 mm HARDOX 450 HB
Brdcjricfi
Straight, beaded front wall 3 mm fine-grained steel S700
Rear wall SHG-4-146-B1.460 mm opposite
Rear wall plate made of 4 mm fine-grained steel, beaded, oscillating,
suspended at a slight angle flush with the top edge of the body
Automatic 2-hook central locking system
Locking hooks beveled 45 degrees on both sides at the top edge,
Opposite rubber seal for rear wall
Additional side locking for tailgate
Double-joint hinge incl. wedge lock for opposing rear wall
Aluminum platform mounted on the chassis
With broom and shovel holder, access in the middle
Plastic half-shell mudguards Domar DK-4175 with original bracket
Mud flaps on the rear axle
2 steps on the inside of the bulkhead
2 wheel chocks with bracket
Shortening the mudguards of the last axle with screwed-on mud flaps
Roller tarpaulin with winding tube, side ratchet tensioners and rear rubber tensioners
Tarpaulin stops in FR r

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.